Vendor productsProducts found: 5322

Spring cotter, Ø 2 x 57 mm, double-wound

CODE:

20370

Availability: 9 item(s)

This product cannot be added to the
cart because you are not logged in.

Retaining clip for pins of 8 to 14 mm diameter, pushed through the cross bore to stop the pin slipping out; galvanised steel.

Diameter (mm)

Length (mm)

CHAPEL telescopic cylinder 3598, single-acting

CODE:

20414

Out of stock. If required, please enquire at mail@trailer.one.

Hydraulic tipping cylinder from the 35xx series that raises the body under pressure and lowers it under its own weight; clarify stroke and installation dimensions via the type number.

WAP grease cap set, M49 x 1 mm, with sealing ring, castle nut M20 x 1,5 mm, split pin

CODE:

8303967

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

Renews the hub closure on heavier stub axles; compared with the M47 set, the cap and nut threads are larger, and the cap is screwed into the hub. Dealer part no.: 790116

Overrun coupling for PAV/SR 2,7 version M, -2700 kg, hole pattern front/rear/side 100/174-197/166 mm, with jockey wheel holder longitudinal

CODE:

337098

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

Replacement for the PAV/SR 2,7 overrun coupling in flange design; taller than the version without bracket due to the attached jockey wheel bracket. Weight 18.4 kg.

CHAPEL seal kit J60100, for “log splitter” 760100

CODE:

J60100

Out of stock. If required, please enquire at mail@trailer.one.

Seal kit J60100 from CHAPEL, assigned to the 760100 log splitter cylinder.

CHAPEL check valve ARDPNU6, double pilot-operated

CODE:

ARDPNU6

Out of stock. If required, please enquire at mail@trailer.one.

Double pilot-operated check valve in 3/8 inch for 30 l/min, pilot ratio 1:6, up to 350 bar.

Triangle reflector, 138 x 158 mm, hole spacing 70 mm, with 2 fixing screws M5

CODE:

102010

Availability: 20 item(s)

This product cannot be added to the
cart because you are not logged in.

Triangular reflector for marking the rear of the trailer; bolted on, fixing screws included.

Brand

Own brand

Hole spacing (mm)

WINTERHOFF coupling head WW 350 RD-K1414, up to 3500 kg, Ø 65 mm, hole spacing cross 40 mm, bores Ø 14.5 mm

CODE:

2699

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

For mounting on round drawbar tubes, fixed with a cross-hole pattern; nose load 200 kg, malleable cast iron housing.

Brand

WINTERHOFF

Diameter (mm)

Gas spring 14/28, 2250 N, 570 mm, 220 mm stroke

CODE:

20457

Availability: 11 item(s)

This product cannot be added to the
cart because you are not logged in.

Gas spring for lifting and holding open heavy flaps and hoods on trailer bodies; compare force, length and stroke with the old part before replacing. Cross-reference nos.: 281987, 1003563; Dealer part no.: 10027642

End fittings

Eye/eye

Extension force (N)

2250

Stecker, 13-polig, 13-polig belegt, mit langer 1-fach Tülle, Deckel oder Parkdose, Schraubanschluss, Kunststoff

CODE:

880043

Availability: 35 item(s)

This product cannot be added to the
cart because you are not logged in.

13-poliger Anhängerstecker aus Kunststoff mit allen 13 Kontakten belegt, langer Einfachtülle als Knickschutz, Schraubanschlüssen und Schutzdeckel; Nachbau, passend als Ersatz für den MENBERS Stecker 13-polig. Alternative zu Artikel Artikel 101490 (MENBERS). Vergleichsnummer: -; Händlernummer: 11002871

Brand

Aftermarket product

Connection

Screw connection

Bolzen, f. RB BPW S 1704-2504-7 RASK f. Formteil 80578/80579

CODE:

880157

Availability: 2336 item(s)

This product cannot be added to the
cart because you are not logged in.

Verbindungsbolzen 10 x 35 mm für die Formteile des Rückfahrhebels in BPW-Radbremsen S 1704-7 bis S 2504-7 RASK; Nachbau, passend als Ersatz für den AL-KO Bolzen 4015428. Alternative zu Artikel Artikel 805790 (AL-KO 4015428). Vergleichsnummer: 4015428; Händlernummer: 11001341

Brand

Aftermarket product

Fits brand

AL-KO