Vendor productsProducts found: 5322

BPW tapered roller bearing 33212, Ø 60/110 x 38 mm

CODE:

02.6407.60.00

Availability: 6 item(s)

This product cannot be added to the
cart because you are not logged in.

Taper roller bearing 33212 from BPW with 60 mm bore and 110 mm outer diameter, overall height approx. 40 mm. Dealer part no.: 800950

AL-KO drawbar 161/251 S DIN towing eye

CODE:

65762

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

AL-KO drawbar for the overrun couplings 161 S and 251 S, fitted with a DIN-standard towing eye, installation length 445 mm. Manufacturer part no.: 571875; Dealer part nos.: 10019827, 519318

CHAPEL counterbalance valve BL38SCB60-350EAT, in block, single

CODE:

BL38SCB60-350EAT

Out of stock. If required, please enquire at mail@trailer.one.

Counterbalance valve in EAT version, single, 350 bar, pilot ratio 2.5:1, 3/8 inch.

Linch pin, Ø 6 x 40 mm, spring ring Ø 37 mm, galvanised steel

CODE:

2681

Availability: 20 item(s)

This product cannot be added to the
cart because you are not logged in.

Secures pins and plug-in axles against slipping out: the pin is pushed through the cross bore and the spring ring is folded over the end of the pin.

Brand

Own brand

Diameter (mm)

AL-KO coupling head AK 7-D, up to 750 kg, square 50 mm, hole spacing horizontal/vertical 90 mm, nose weight 75 kg

CODE:

420640

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

For unbraked trailers with square drawbar; fixed via Ø 10.5 mm bores with horizontal and vertical hole spacing.

Brand

AL-KO

Hole spacing (mm)

Brake shoe set, 250 x 40 mm, for RB BPW S 2504-7 RASK, 4 brake shoes, 2 spring sets

CODE:

901821

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

For renewing the brake shoes on the BPW S 2504-7 RASK wheel brake; the spring sets comprise 4 hold-down springs as well as 2 long and 4 short tension springs.

Brand

Aftermarket product

Length (mm)

250

TRIPUS wheel chock UK-10, red, 90 x 224 x 99 mm

CODE:

40069

Out of stock. If required, please enquire at mail@trailer.one.

Secures parked trailers, caravans or light commercial vehicles against rolling away, even on slopes or gravel; plastic, wheel load 800 kg.

Hex nut, M10 x 8 mm, across flats 17

CODE:

40601

Availability: 100 item(s)

This product cannot be added to the
cart because you are not logged in.

Standard nut with coarse thread for bolted joints on chassis and body, low overall height of 8 mm.

Spanner size

Thread

M10

KNOTT brake cable, length sleeve/total 500/760 mm, cable nipple/M10, outer bell Ø 30 mm/M16 x 1,5 mm

CODE:

33983-1.01

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Short cable from the 30 mm series: 500 mm sheath, 760 mm overall length, bell Ø 30 mm and M16 x 1.5 on the sheath, M10 on the cable. Dealer part no.: 640500

NIEPER LSTO ring, Ø 35/62 x 4 mm

CODE:

98021300

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

For hubs with 35 mm bearing seat and 62 mm mount; as a 72 mm variant with the same bore is also stocked, the hub diameter determines the choice. Dealer part no.: 780029