Vendor productsProducts found: 5322

ASPÖCK connection cable, 7 m, with 13-pin plug, 5-pin bayonet connection, 2 x branch 0.2 m DC flat cable

CODE:

58-2040-077

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Supply cable from the 13-pin socket to the 5-pin bayonet connection; the two DC flat cable branches split off directly before the bayonet, and the length is also sufficient for trailers with a longer drawbar. Dealer part no.: 701042

Brand

ASPÖCK

Cable outlet

Storage box bracket (piece), 190 x 190 x 70 mm

CODE:

40715

Availability: 85 item(s)

This product cannot be added to the
cart because you are not logged in.

Carries a storage box on the trailer chassis, two are normally needed per box; check the hole pattern and chassis width beforehand. Dealer part no.: 11002998

WINTERHOFF dropside lock BV 90-1, 265 x 52 mm, galvanised

CODE:

1860035

Availability: 10 item(s)

This product cannot be added to the
cart because you are not logged in.

WINTERHOFF side board fastener BV 90-1, 265 x 52 mm and, at 1.09 kg, the heaviest in the range. Cross-reference no.: W 6722; Dealer part no.: 535111

Brand

WINTERHOFF

Hole(s) (mm)

WINTERHOFF jockey wheel ST 48-CW-260 LB, Ø 48 mm, Ø 260 x 85 mm pneumatic wheel, overall height 610 mm, nose weight static/manoeuvring 150/90 kg, with nose weight indicator

CODE:

1860925

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

For supporting and manoeuvring the drawbar; the indicator in the tube shows the nose load, so a separate nose load gauge is not needed. Outer tube 480 mm, weight 5.57 kg. Cross-reference no.: W 6097; Dealer part no.: 193747

Brand

WINTERHOFF

Extension length (mm)

220

OMC brake cable, length sleeve/total 720/1010 mm, cable eye/M8, collar Ø 9 mm/collar Ø 9 mm, for wheel brake 135 IT

CODE:

660510

Availability: 3 item(s)

This product cannot be added to the
cart because you are not logged in.

For the 135 IT wheel brake, with 720 mm sheath and 1010 mm overall length, eyelet at one cable end and M8 thread at the other.

Brand

OMC

Cable connection A

Eyelet

Shock absorber A2, installed length 233-343 mm, for AL-KO

CODE:

65491

Availability: 14 item(s)

This product cannot be added to the
cart because you are not logged in.

Replacement damper for AL-KO axles in version A2, usable between 233 mm and 343 mm installed length. Cross-reference no.: 2287470005; Dealer part no.: 501068

Brand

Aftermarket product

Guide bearing, Ø 74.8/45 x 220 mm, with bearing bushes, metal, for KNOTT KR20

CODE:

600081 (26015993)

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Metal guide bearing for KNOTT KR20, 220 mm long, with fitted bearing bushes and 45 mm inside diameter. Cross-reference no.: 26015993; Dealer part no.: 600081

Brand

Aftermarket product

Design

Round

WAP overrun damper, -1000 kg, 235/180 mm, eye Ø 12/8 mm, for WAP 10/10.1

CODE:

8504725

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

Damper for the WAP overrun coupling 10/10.1, up to 1000 kg, with 12 mm eye on the rod and 8 mm eye on the housing. Dealer part no.: 790624

Brand

WAP

Extended length (mm)

235

AL-KO thrust washer, right, for AKS 3004

CODE:

65555

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Right-hand thrust washer of the AL-KO AKS 3004, counterpart to the left-hand version. Manufacturer part no.: 690242; Dealer part nos.: 10018168, 704064

Brand

AL-KO

EAN

4054354064771

ASPÖCK/HUMBAUR Innotrailer lens left

CODE:

63993

Availability: 7 item(s)

This product cannot be added to the
cart because you are not logged in.

Replacement lens for the left-hand HUMBAUR Innotrailer rear light, weighing 0.25 kg. Manufacturer part no.: 41100251; Cross-reference no.: 425029.001; Dealer part nos.: 951403, 701538, 11007960

Brand

ASPÖCK

EAN

4054354087190

Lashing eye ZBF 50-1, 20/46 x 46 x 45 mm

CODE:

64183

Availability: 15509 item(s)

This product cannot be added to the
cart because you are not logged in.

Flat bolt-on lashing point for claw hooks and snap hooks, replacement for existing lashing points of the same design; lashing capacity 240 daN, bores Ø 7 mm. Dealer part no.: 11002533

Brand

Aftermarket product

Hole spacing (mm)